Pichler Joker XL, Руководство пользователя

Страница: 6 / 24

thread.
Electric wire
5
JOCKER Instruction Manual
2) Using a modeling knife, remove the cov-
ering at possition show below.
C/A glue
C/A glue
Secure.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Aileron
control horn
2.INSTALLING THE AILERON
CONTROL HORN.
A+B Epoxy
PLUS
glue
A
B
A+B Epoxy
PLUS
glue