Picard LP - 200 Series, Инструкция по эксплуатации, техническому обслуживанию и запасным частям

Страница: 18 / 28

18
WARNING
Do NOT clean up a hot
stone with cold water or it
could crack.
PICARD TUNNEL OVEN MAINTENANCE
LUBRICATING THE CHAIN FOR STONE
1. Make sure the inside temperature of oven is lower than 122 ˚F or 50 ˚C.
2. Remove the hood to access the chains.
3. Turn ON the stone conveyor to its maximum speed.
4. Use dry graphite food grade lubricant on its entire length at the 4 places indicated by the
arrows on the drawing above.
CLEANING UP THE STONE CONVEYOR
1.
Lower the oven internal temperature to 150 ˚F or 66 ˚C.
2. Remove the hood.
3. Turn ON the stone conveyor to its maximum speed.
4. Clean up the stones with one of the scrapers sent with
the oven. Afterwards, clean it up again with a rag and
warm water.
CLEANING UP THE EXIT CONVEYOR
1. Turn OFF the main burners’ ignition switch.
2. Clean up the wire belt with a rag and warm
water. To ease to cleaning process, pull the wire
belt upwards.
01