PICA Product Development iLink LCD, Инструкция по установке и эксплуатации

Страница: 9 / 16

9
Installation - Optional LAN or Wireless Option:
Hardwired LAN (Default) - If connected to the Hardwired LAN set the local networks type of IP - either DHCP
or STATIC. If using DHCP everything should set automatically. If using STATIC then use one of these three
methods:
Method 1. The LCD display and keypad (see page 8 - 10).
Method 2. The built in web browser (see page 11 for web portal screen shot).
a. Type the IP of the unit in either IE, Firefox or Chrome.
b. Type the default password - TLKDIG.
c. Check off STATIC.
d. Enter in IP, Subnet & Gateway.
e. Set DNS and Connect-Back information if required.
f. Click the “Submit” button.
g. Unit will reboot and new settings will take effect.
Method 3. Dealer set through NTL Studio. Call your dealer for details.
Wireless LAN - If unit is connected to the Hardwire LAN it can be put into WiFi mode using the built-in web
portal using the following steps (see page 11 for web portal screen shot):
Step 1: Type the IP of the unit in either IE, Firefox or Chrome.
Step 2: Type the default password - TLKDIG
Step 3: Check off “Use 802.11 WiFi Network Port”
Step 4: Enter in WiFi Network Name.
Step 5: Enter in WiFi Network Password
Step 6: Set to DHCP or STATIC network. If STATIC then set IP, Gateway and Subnet.
Step 7: Set DNS and Connect-Back information if required.
Step 8: Click the “Submit” button.
Step 9: Unit will reboot into Wireless Mode.
Note: Distance on the Wireless Mode is about 125ft. line-of-sight.
Walls, furniture and other items can reduce this distance.
Note: See Page 7 for taking unit out of WiFi Mode after it has been set on the unit.