27
Calibrating
Basic keyboard calibration
INFO:
The piano has to be calibrated after the QuietTime Magic
Star System has been installed in your piano. The reason for
this is that the Magic Star tone generator requires
information about each key’s movement path.
ATTENTION! Only a few or even none of the keys will function correctly if
you do not run a calibration. It might also be necessary to
run a new calibration if the location or the form of keys has
changed over time, e.g. after the piano has been delivered
to your house.
How to perform a calibration:
Requirements:
a. All cables are correctly connected to the QuietTime system. The
system has to be switched on.
b. Move the stop rail lever to the “Normal” position (piano can be
played).
c. Make sure there is nothing on the piano that can press down a key.
Turn the system on.
Shortly after switching the device on (approx. 1-2 seconds) press and hold
the METRO key. Let go when the headline “KEY INITIALIZE” is visible on
the display.
The following is displayed:
KEY INITIALIZE
Press every key and
Pedals, and press
[METRO] when done.
