manualshive.com logo in svg

PIAGGIO X7 125 2012, Руководство пользователя

Поделиться
Скачать
PIAGGIO X7 125 2012 Скачать руководство пользователя страница 69

JASO MA, MA2 - API SL - ACEA A3

Cleaningthevehicle

Use a low pressure jet of water to soften the caked dirt and mud deposited on the
painted surfaces. Once softened, sponge off mud and dirt using a car body sponge
soaked in a car body shampoo and water solution (2-4% of car shampoo in water).
Then rinse with abundant water, and dry with a shammy cloth. For the engine exterior,
use petrol, a brush and clean cloths. Petrol can damage paintwork. Remember that
any polishing with silicone wax must always be preceded by washing.

CAUTION

DETERGENTS CAN POLLUTE WATER. THE VEHICLE MUST BE WASHED AT A
WASH STATION EQUIPPED WITH A SPECIAL WATER PURIFICATION SYSTEM.

WARNING

THE USE OF A HIGH-PRESSURE WATER JET IS STRONGLY DISCOURAGED
FOR ANY ENGINE CLEANING OPERATION; HOWEVER, IF NO OTHER MEANS
ARE AVAILABLE, IT IS THEN NECESSARY TO:

• ONLY USE A FANLIKE SPRAY JET.

• DO NOT PLACE THE NOZZLE CLOSER THAN 60 CM.

• DO NOT USE WATER AT TEMPERATURES OVER 40ºC.

• DO NOT USE HIGH-PRESSURE WATER JETS.

• DO NOT STEAM WASH.

69

3 Maintenance

Содержание X7 125 2012





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды