03_19
Rearopticalunit (03_19)
In order to reach the rear tail light bulb remove the 2 «
D
» retaining screws. To gain
access to the turn indicator bulbs, remove the fastening screws «
E
». Remove the light
taking off the retaining screw, then remove the bulb holder form its support; press the
bulb slightly, turn it about 30° and then extract it. The bulbs have a bayonet coupling,
to remove them press gently and twist anticlockwise about 30°. To refit follow the same
steps but in reverse order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS ATTRIBUTABLE TO HUMIDITY AND/OR
TO LOW TEMPERATURES.
THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.
THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE AFTER-SALES SERVICE
NETWORK.
03_20
Rear-viewmirrors (03_20)
To adjust the left mirror position, hold the mirror stem firmly at the desired position and
lock the nut «
B
» with a 13mm box-spanner. The rear view mirror is mounted on the
stem with a ball "joint" «
A
». The mirror can be adjusted to the desired position man-
ually.
Adjust the right wing mirror as shown in the picture; having screwed the stem in the
desired position, operate the ball "joint" until correctly aligned.
40
3 Maintenance
Содержание Liberty 50 Catalyzed 2019
