PIAGGIO beverly 500, Руководство пользователя

Страница: 53 / 84

03_22
03_23
03_24
Front light group (03_22, 03_23, 03_24, 03_25, 03_26)
To remove the front headlight assembly, proceed as follows:
1 . Remove screws « A » of the brake fluid tank cover.
2 . Remove the 3 windshield screws and the windshield proper.
3 . Remove the rear-view mirrors.
4 . Remove the screws " C " of the upper coupling.
5 . Remove the screws " C " of the lower coupling.
6. Remove the two screws " D " of the front handlebar cover.
7 . Remove the front handlebar cover.
This gives access to the bulbs.
Release the spring and take out the bulb of the high-beam/low-beam headlamp « E ».
To replace the tail light « F », pull out the rubber bulb holder from its seat.
To reassemble, repeat the operation in the reverse order.
WARNING
THE TWIN-FILAMENT (HIGH-BEAM AND LOW-BEAM) BULB IS HALOGEN: DO
NOT TOUCH THE BULB WITH YOUR FINGERS TO AVOID COMPROMISING ITS
FUNCTIONING
Headlight adjustment (03_27, 03_28)
Proceed as follows:
1 . Place the vehicle in running order and with the tyres inflated to the prescribed pres-
sure, on a flat surface 10 m away from a white screen situated in a shaded area,
making sure that the longitudinal axis of the vehicle is perpendicular to the screen;
53
3 Maintenance