PIAGGIO 2012 MSS APE 50, Руководство по обслуживанию станции

Страница: 87 / 117

2) Gasket
3) Seeger ring
4) Washer
5) Gasket
6) Buffer
7) Plug
8) Pump body
9) Piston
10) Ring
11) Toric gasket
12) Spring
13) Cup
14) Spring
Brake pump overhaul specifications
After washing all the parts with a specific solvent, never use oil, petrol or solvents that have a corrosive
effect on the rubber, check that:
The pump body does not show signs of internal damage or corrosion as this may result in sealing ring
or piston failure; the latter must also be replaced if worn or scratched.
The rubber parts in the piston and the valve are not dilated or damaged as this most likely leads to poor
braking.
The piston return spring is in good condition.
The passages connecting the pump tank to the pump body are not clogged or dirty.
Removing brake fluid reservoir and pump from chassis
Removal:
After removing the brake fluid, remove the tank.
CAUTION
•
BRAKE FLUID IS HARMFUL TO THE EYES. IF
IT COMES INTO CONTACT WITH THE EYES
WASH THE AFFECTED PART CAREFULLY
AND CONSULT A DOCTOR.
•
FOR CORRECT OPERATION OF THE
BRAKES, USE ONLY THE RECOMMENDED
BRAKE FLUID.
•
FOLLOW THE INSTRUCTIONS PROVIDED BY
THE BRAKE FLUID MANUFACTURER.
•
NEVER MIX LIQUIDS WITH DIFFERENT
TECHNICAL SPECIFICATIONS.
•
USE ONLY BRAKE FLUID KEPT IN SEALED
CONTAINERS. IF THE LIQUID IS EXPOSED
TO THE AIR FOR TOO LONG IT ABSORBS
HUMIDITY AND LOSES ITS EFFICIENCY.
•
KEEP THE BRAKE FLUID FREE OF LITTER,
SAND OR DUST.
MSS APE 50
Braking system
BS - 87