Shock Lamp RS400 H.I.D.
Installation Instructions
Thank you very much for purchasing this PIAA product.
Please read the entire manual before installation and use of this product.
For Installers
Please give this installation manual to customer after installing.
When installing two lamps on the vehicle, it is necessary to purchase another
relay harness
(Pn 34035)
. One harness is required for each lamp.
• Lighting laws vary from state to state.
Check your local laws before use.
• The lamps get very hot when they have been in use.
Do not touch them as they may cause burns.
• After the lights have been on, do not place them near flammable objects.
• Do not splash water directly on the hot lamps, as this may cause cracking of the lens due
to dramatic change in temperature.
• To avoid potential damage to your eyes, do not look directly into the lamp.
• This product is designed for 12V automotive electrical systems only.
• Using this light system while the engine is not running will drain the battery.
• Do not repeatedly turn the light system on and off as it will shorten the life of the system.
• To avoid potential damage to your lights, make sure your lights are turned on prior to
starting or shutting off your vehicle.
• Using the wrong bulbs may cause a malfunction. Use only specified PIAA bulbs.
• When changing bulbs or lenses follow the lamp assembly/disassembly diagram.
WARNING
1
