5 Installatio
22
Version: 1.1.0
PZ266E
P-88x.x5 Piezo Actuator
Tools and accessories
P-890.xx coaxial cable (p. 12), LEMO to open end (can be ordered separately)
Suitable soldering iron
Suitable solder
Suitable cable tools
Connecting the P-88x.x5 to the electronics
1.
If necessary, shorten the wire and the cable shield of the coaxial cable to the correct
length.
2.
Make the stranded wires of the P-88x.x5 accessible:
−
If the stranded wires of the P-88x.x5 are short-circuited, sever the connection
between the stranded wires.
−
Remove all aids and components that have been connected to the P-88x.x5 for
short-circuiting or discharging (e.g., discharging resistor).
3.
Solder the red stranded wire of the P-88x.x5 to the wire of the coaxial cable connected
to the inner contact of the LEMO connector.
4.
Solder the black stranded wire of the P-88x.x5 to the cable shield of the coaxial cable.
5.
Insulate the soldered cable connections appropriately.
6.
Connect the connector of the P-88x.x5 to the corresponding connection on the
electronics.