PI P-844, Руководство пользователя, Страница: 13 / 32

Figure 5: No lateral forces or torques
A: Wrong: Shearing force due to lateral force
B: Right: Axial loading of the actuator
C: Wrong: Torsion due to torque
6.2 Mounting the P-844 and Connecting to a Protective Earth
Conductor
The protective earth connection of the P-844 is established as follows:
■ Mounting hole in the base of the P-844
■
Suitable, conductive screw
■
The underlying surface that is connected to the protective earth conductor
Pay attention to the applicable standards for connecting the protective earth conductor.
Tools and Accessories
■
Suitable protective earth conductor: Cable cross section
≥
0.75 mm
2
■
Electrically conductive screw of suitable size and length (see "Dimensions" (p. 29) )
■
Open-end wrench for holding the base (p. 10) of the P-844 (see "Dimensions" (p. 29) for
across flats size)
■ Suitable screwdriver
Requirements
✓
You have read and understood the general safety instructions (p. 7) .
✓
You have read and understood the section "Avoiding Mounting Errors" (p. 12) .
✓
The P-844 is not connected to the electronics.
✓
The P-844 is discharged (p. 20) .
✓
You have provided a suitable surface for mounting the P-844:
■
The underlying surface has suitable mounting holes (p. 29) .
■
The underlying surface is connected to a protective earth conductor.
■
The underlying surface is sufficiently conductive to ensure proper function of the
protective earth conductor.
✓
You have accounted for the space required to route cables without bending and
according to regulations.
6 INSTALLATION P844M0001EN
‒
11/13/2018
13
M O T I O N | P O S I T I O N I N G