PZ240EK 6.1.0 10/2019. 2.0
M O T I O N | P O S I T I O N I N G
CAUTION!
If there is no protective earth conductor,
there is a danger of minor injuries from
electric shock.
X
Operate the stage only with a
properly connected protective earth
conductor.
X
Pay attention to the applicable stan-
dards for attaching the protective
earth conductor .
Suitable Protective Earth Conductor
▪
▪
Cross section of the protective earth con-
ductor ≥0.75 mm².
Connecting via Separate Protective
Earth Connector
If a separate protective earth connector is
available, it must be used.
1. Attach a suitable cable lug to the protective
earth conductor.
2. Use the screw set supplied to attach the
cable lug of the protective earth conductor
to the protective earth connector.
3. Tighten the M4 screw with at least three
turns and a torque of 1.2 to 1.5 Nm.
a
Protective earth connector in the base
body of the positioner
b
Safety washer
c
Flat washer
d
Cable lug of the protective earth conductor
e
M4 screw
Connection via Mounting Holes
If a separate protective earth connector is not
available, the stage has to be mounted on an
electrically conductive surface connected to a
protective earth conductor.
1. Place a safety washer on each mounting
screw.
2. To fix the stage to underlying surface, use
sufficiently conductive screws in all moun-
ting holes.
3. Tighten the mounting screws with at least
three turns (for torque, see manual).
1
Screw
2
Safety washer
3
Mounting hole
The instructions required for startup and ope-
ration are in the manual for the electronics.
In accordance with EU law, electrical and
electronic equipment may not be disposed of
in EU member states via the municipal residual
waste.
Dispose of your old equipment according to
international, national, and local rules and
regulations.
PI undertakes environmentally correct and free
disposal of all old PI equipment made available
to the market after 13 August 2005.
If you have an old device from PI, you can send
it to PI free of charge.
Connecting the Positioner
to the Protective Earth
Conductor
Starting and Operating the
Positioner
Old Equipment Disposal
