NOTICE
Damage due to collisions!
Collisions can damage the L-417.099232B, the load to be moved, and the surroundings.
►
Stop the motion immediately if an electronics malfunction occurs.
►
If possible, adapt the travel range limits of your mechanical system in the software that
you use for commanding the motion.
NOTICE
Damage due to the high acceleration!
High acceleration can cause considerable wear and damage the L-417.099232B.
►
Stop motion immediately if a malfunction occurs.
►
Avoid collisions with objects in the workspace or the end of the travel range.
►
Approach the end of the travel range always at a low velocity.
NOTICE
Uncontrolled oscillation!
Oscillation can cause irreparable damage to the L-417.099232B. Oscillation is indicated by a
humming noise and can result from the following causes:
■
The load and/or dynamics during operation differ considerably to the calibration settings.
■
The L-417.099232B is operated near to its resonant frequency.
►
If you notice oscillation, stop the L-417.099232B immediately.
Starting and Operating the L-417.099232B
1. Start the electronics (see the user manual for the electronics).
2. Configure the electronics for the L-417.099232B during startup:
■
If you are using a digital controller from PI: In the PC software, select the entry in the
positioner database that matches the L-417.099232B exactly.
■
If you are using electronics from another manufacturer: Configure the electronics
according to the parameter of the L-417.099232B.
3. Start a few motion cycles for testing purposes (see the user manual for the electronics).
7 STARTUP / OPERATION
L417M0004EN
‒
11/21/2018
19
M O T I O N | P O S I T I O N I N G
