User Guide
Doc# A824D001 v2.0
15-Nov-2018
Page 21 of 28
PI (Physik Instrumente) L.P.
16 Albert Street, Auburn, MA 01501
Tel: 508-832-3456 Fax: 508-832-0506
Email: [email protected]
13.3. Simple Motion
Simple point-to-point motions can be created using the Motion Manager. To access, make sure the Motion
Manager component has been added to your controller object. Select the Motion Manager.
Figure 12 - Motion Manager
Simple motion types can be created by selecting one of the motion types and then setting some basic
parameters. Below is an example of a simple back-and-forth motion commanded for two axes. Motion can be
started by clicking on the “Start Motion” button.
Figure 13 - Back and Forth Motion
Note: The axis will already be enabled if the Homing and Initialization program has been run, as described in
Section 13.2.
