1
www.phywe.com, © All rights reserved
09057-51 / 0414
Operating instructions
XR 4.0 X-ray Plug-in with copper/molybdenum/iron/tungsten
X-ray tubes
09057-51
09057-61
09057-71
09057-81
PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
D-37079 Göttingen
Phone
+49 (0) 551 604-0
Fax
+49 (0) 551 604-107
The unit complies with
the corresponding EC
guidelines.
Fig: 09057-51, 09057-61, 09057-71, 09057-81
CONTENTS
1 SAFETY PRECAUTIONS
2 PURPOSE AND CHARACTERISTICS
3 FUNCTIONAL AND OPERATING ELEMENTS
4 NOTES ON OPERATION
5 HANDLING
6 TECHNICAL SPECIFICATIONS
7 PARTS SUPPLIED
8 ACCESSORIES
9 NOTES ON THE GUARANTEE
10 WASTE DISPOSAL
11 APPENDIX
1 SAFETY PRECAUTIONS
•
Carefully read these operating instructions completely
before operating this instrument. This is necessary to
avoid damage as well as for user-safety.
•
Only use the instrument for the purpose for which it was
designed.
•
Only use the instrument in dry rooms in which there is no
risk of explosion.
•
Never cover up the vent slots of the experimental set-up.
•
Do not open up the instrument.
•
Do not connect other instruments to the unit than those
intended for it.
•
Take care that no liquid penetrates in through the hous-
ing openings.
•
Switch the unit off after usage, as it is not designed for
permanent operation. The maximum recommended daily
operating time is 10 hours. Exceeding this does not rep-
resent a safety risk but can negatively influence the ser-
vice life of X-ray tubes.
•
Take care when drawing out a tube insert that has been
in operation as internal parts of it could be very hot.
•
Handle with Care
