phytron SINCOS, Руководство пользователя

Страница: 19 / 22

Manual SINCOS
18 MA 2066-A006 GB
7 To Consider before Installation
Read this manual very carefully before installing and operating this unit.
Observe the safety instructions in the following chapter.
7.1 Qualified Personnel
Design, installation and service may only be performed by qualified and trained
personnel.
This personnel should be able to recognize and handle risks emerging from
electrical, mechanical or electronic system parts.
WARNING !
By persons without proper training and qualification serious damages to devices
and persons might result!
7.2 Safety Instructions
1. Check the output voltages of the supply unit before connecting the SINCOS
rear connector.
Inverted supply voltage leads would immediately cause damage of the
power stage.
2. Do not unplug the SINCOS when powered !
3. Check correct wiring of the motor leads.
4. Always switch off the supply voltage if you connect or disconnect any wires or
connector.
Most important:
Do not unplug the motor connector while powered !
Danger of electric arcing.
5. Voltages connected to the signal inputs and outputs should be safely
separated from mains.
The maximum voltage against protective ground must not exceed 60 V
DC
or
25 V
AC
.
6. The inputs STOP and MOTOR CURRENT OFF must only be switched during
motor standstill.