Pinout of the camera connector, phyCAM-S
8-pol. LVDS. cable, RJ45 to DF13-08S-1.25C
Pinout DF13-08S-1.25C on camera
phyCAM-S - Electrical Interface Camera Board, Hirose DF13A-8P-1.25H
Pin
Signal
Dir
Function
1
LVDS DATEN P
OUT
LVDS-Daten from camera
2
LVDS DATEN N
OUT
LVDS-Daten from camera
3
LVDS CLOCK N
IN
Master-Clock to camera
4
SDA
I/O
I²C-Interface (3,3V)
5
SCL
IN
I²C-Interface (3,3V)
6
LVDS CLOCK P
IN
Master-Clock to camera
7
VCC +3,3V
IN
power supply 3,3V, max. 300 mA
8
GND
-
ground
Signal direction to camera board
Pinout RJ-45-female on SBC
phyCAM-S - Electrical Interface RJ-45 (8P8C)
Pin
Signal
Dir
Function
1
LVDS DATEN P
IN
LVDS-Daten from camera
2
LVDS DATEN N
IN
LVDS-Daten from camera
3
LVDS CLOCK N
OUT
Master-Clock to camera
4
SDA
I/O
I²C-Interface Data (3,3V)
5
SCL
OUT
I²C-Interface Clock (3,3V)
6
LVDS CLOCK P
OUT
Master-Clock to camera
7
VCC +3,3V
OUT
power supply 3,3V, max. 300 mA
8
GND
-
ground
Signal direction to base board
Dimensions
PCB outline ± 0,25mm
drill holes ± 0,1mm
The optical center is located in the
center of the camera board. The
connector is mounted on the backside,
cable connection from the top. Direction
of pixel readout can be set by software,
the image can be horizontally and
vertically mirrored.
All mounting holes are metal plated and
can be connected to the board’s ground
plane by capacitors.