First
Steps
The dialog
Special
allows the access to several special parameters of
the camera that are usually not disclosed. GPIO and Strobe are at the
moment not supported.
© PHYTEC Messtechnik GmbH 2011 L-740e_0
35
ehler! Verweisquelle konnte
for the USB-CAM-051H, 151H, 052H and
. With the Offset
u can individually set the center of the image.
•
Properties – Partial Scan (Figure 29
F
nicht gefunden werden.
)
This dialog is only
152H are available.
In this dialog you can select the binning. So you can take several
pixel together and receiving a higher sensitivity
yo
ACHTUNG: ATTATION: The binning is only available with a
resolution of 640x480 or 1280x960. You must first set the right
resolution bevor you can use the binning mode.
Figure 29: Further: Camera Settings „Partial Scan“
