Phytec phyCORE-P8xC51Mx2, Руководство по оборудованию

Страница: 21 / 82

Jumpers

PHYTEC Messtechnik GmbH 2005 L-602e_3
13
3 Jumpers
For configuration purposes, the phyCORE-P8xC51Mx2 has 20 solder
jumpers, some of which have been installed prior to delivery.
Figure 5 illustrates the numbering of the jumper pads, while Figure 6
and Figure 7 indicate the location of the jumpers on the board. With
the exception of Jumper J18 all solder jumpers (Jxx) are located on
the top side of the phyCORE-P8xC51Mx2.
Figure 5: Numbering of the Jumper Pads
Figure 6: Location of the Jumpers (Top View)
1
2
3
1
2
e.g.: J1, J4, ..
e.g.: J2, J3, ..
1
2
3
4
e.g.: J20