Phytec phyCORE-ADuC812, Быстрый старт

Страница: 51 / 86

Getting More Involved
© PHYTEC Meßtechnik GmbH 2002 L-462e_2
47
3.8 “Hello2”
A return to the “Hello” program allows a review of how to modify
source code, create and build a new project, and download the
resulting output file from the host-PC to the target hardware. For
detailed commentary on each step, described below in concise form,
refer back to the “Blinky2” example starting at section 3.1.
3.8.1 Creating a New Project
•
Start the Keil
µ
Vision2 environment and close all projects that
might be open.
•
Open the Project menu and create a new project called Hello2.uv2
within the existing project folder
C:\PHYBasic\pC-ADuC812\Demos\Keil\Hello2 (default location)
on your hard-drive. Select the Analog Devices ADuC812 in the
CPU vendor data base list.
•
Add Hello2.c and Startup.a51 from within the project folder to the
project Hello2.uv2.
•
Your project window should now look like this:
•
Save the project.
At this point you have created a project called Hello2.uv2 consisting
of a C source file called Hello2.c and an assembler file called
Startup.a51.