Figure 2.1.4
The
Device Configuration Wizard Selection Dialog
box comes up,
Change the name
Generic Linux Device
to give the device a unique name:
AM335x,
Type in the IP address Box as –
192.168.1.196
(For your target),
In the Box -
The Username to log into device,
write entry as
root,
Make sure Authentication type is Password, but
leave the password field blank
.
Click
next
and click
Finish
Figure 2.1.5
Now you should see Device test finished successfully, so you can close the window
© PHYTEC Embedded Pvt. Ltd 2014
11
Revision no. 1.0
