Phytec FireWire-CAM-001, Руководство пользователя

Страница: 25 / 86

First Steps

PHYTEC Messtechnik GmbH 2005 L-661d_1
19
Figure 13: Camera Connectors
•
You can now establish the FireWire connection. To do this insert
the cables 6-pin plug into the „In“ socket on the back of the camera
and the 4-pin plug into the FireWire socket on your computer.
Caution!
Before initial start up you will first need to install the corresponding
software on your PC. Without the driver the camera will function in a
limited capacity or not at all. Refer to section 2.3 for installation of the
driver.
2.2.2 Installation of a FireWire Interface Card (Laptop)
This step is only required if your laptop is not equipped with a
FireWire interface.
In this case you will require an interface card for FireWire. In the
following paragraphs we describe the installation of the PHYTEC
FireWire Card, Order Nr. PC-110.
Depending on the order option you have, this card may already be
included as part of your kit contents.
The card PC-110 is an add-on card for the PC-Card receptacle socket
(also identified as „Cardbus“). Your laptop must be equipped with a
socket of this type.
Please note the additional system requirements listed in the card
manual.