Physio Control TrueCPR 80596-000001, Инструкция по эксплуатации

Страница: 23 / 28

©2018 Physio-Control, Inc. 19
Electromagnetic Compatibility Guidance
Voltage dips, short
interruptions and voltage
variations on power
supply input lines
IEC 61000-4-11 <5% U
T
(>95% dip in U
T
) for
0.5 cycle
40%
U
T
(60% dip in U
T
)
for 5 cycles
70%
U
T
(30% dip in U
T
)
for 25 cycles
<5%
U
T
(>95% dip in U
T
) for
5 sec
Not applicable The TrueCPR device is battery-powered.
Power frequency (50/60
Hz) magnetic field
IEC 61000-4-8 3 A/m 3 A/m Power frequency magnetic fields should be at
levels characteristic of a typical location in a
typical commercial or hospital environment.
Note: U
T
is the AC Mains voltage prior to application of the test level.
Table 3 Guidance and Manufacturer’s Declaration - Electromagnetic Immunity
The TrueCPR device, model 80596-000001, is intended for use in the electromagnetic environment specified below.
The customer or user should ensure that the TrueCPR device is used in such an environment.
Immunity Test
IEC 60601
Test Level
Compliance
Level
Electromagnetic Environment - Guidance
Portable and mobile RF communications
equipment should be used no closer to any part
of the TrueCPR device, including cables, than
the recommended separation distance
calculated from the equation applicable to the
frequency of the transmitter.
Recommended separation distance
Conducted RF
IEC 61000-4-6 3 Vrms
150 kHz–80 MHz 3 Vrms
Table 2 Guidance and Manufacturer’s Declaration - Electromagnetic Immunity (Continued)
The TrueCPR device, model 80596-000001, is intended for use in the electromagnetic environment specified
below. The customer or user should ensure that the TrueCPR device is used in such an environment.
Immunity Test
IEC 60601
Test Level
Compliance
Level
Electromagnetic Environment - Guidance
d 1.2 P =