3
Precautions
Observe the appropriate electrical safety codes and regulations. Consult with National
Electrical Code, and/or other nationally or locally recognized procedures relevant to your
location.
When measuring flammable, explosive or toxic gasses; vent the sample outlet to a safe
and appropriate location.
When measuring high pressure samples (do not exceed 1000 psia); be sure that the
system is depressurized before connecting or disconnecting the sample tubing.
Corrosives such as Ammonia, HCl and Chlorine should be avoided; H
2
S and SO
2
can be
present if the moisture content is below 10 PPMv.
Avoid extreme temperatures, pressures and mechanical vibration, refer to specifications.
Do not disassemble the analyzer.
Do not use with contaminants and liquids, refer to section 5.2 for sample conditioning.
Avoid exposing the sensor to ambient air as it may slowdown your next measurement.
The PLMa and its I/O connector are weatherproof.
Save the shipping Tube to be used if the PLMa needs to be shipped for recalibration.
3
