Phylink PLC-128 Series, Быстрая установка

Страница: 9 / 32

9
PHYLINK Covert Network Camera Quick Install Guide
Hardware Installation
The PLC-128PW can be either connected with Power Adaptor and network cable, or
optionally with a CAT-5 network cable that is connected to an 802.3af compatible
PoE Switch or PoE Injector. Under this condition, the network cable will transmit both
power and data over a single cable and you don’t need to connect the power adapter.
IMPORTANT!
Please note that for initial setup, you need to connect the camera directly to your
router or switch with a network cable. You can NOT connect wirelessly to the
camera without first setting it up via a network cable. After initial setup only the
power cable is required for the Wi-Fi connection.
Connection Using a PoE Switch or PoE Injector
If using a Wi-Fi connection, the provided external antenna must be mounted to the
SMA connector on the
. Please keep the antenna vertical for better signal Main Unit
strength.
The Micro SD Card must be insert to the slot before the Main Unit is powered on.
Note: The camera only supports FAT32, if the SD card is NTFS or Non FAT32 format,
you need to format it in FAT32 on PC.
Mount the Micro SD Card
Mount the antenna