Phuel OPS-4247, Инструкции по эксплуатации, Страница: 14 / 14

Technical Documentation
Stuffing Box
IPC-4336 Rev C 13
Item No Part Number Description Quantity
9 100-2526-B21 WIRE BUSH 1
12 100-1980-B21 BOP SEAT 1
15 100-1985-PU9 BLOW OUT PLUG 1
16 100-2514-PU8 S-BOX PACKING STICK-SET 2
21 801-0114-V90 O-Ring - B.S Size 114 1
25 100-2527-B21 PISTON PLUG 1
Table 10: Wire Kit WKS-4117-125
Item No Part Number Description Quantity
9 100-3425-B21 WIRE BUSH 1
12 100-3427-B21 BOP SEAT 1
15 100-3428-PU9 BLOW OUT PLUG 1
16 100-3476-PU8 S-BOX PACKING STICK (0.160) 2
21 801-0114-V90 O-Ring - B.S Size 114 1
25 100-3426-B21 0.160 PISTON PLUG 1
Table 11: Wire Kit WKS-4117-160
4.3 Operation Specific Parts
The packing stick performance can be controlled by using the correct spacer for the intended
operational requirements. It is normally recommended that a low friction spacer should be selected
to avoid excessive friction on the wire. If there is sufficient tool weight or there is a desire to have a
full operating seal in the S-Box against the wire without any applied piston pressure then a high
pressure spacer should be used. Ensure that the specified spacer is fitted according to the line
being used.
Wire Size & Type Part No Thickness
0.125 – Low Friction 100-5058-L25 0.400”
0.125 – High Pressure 100-5058-H25 0.330”
0.108 – Low Friction 100-5058-L08 0.360”
0.108 – High Pressure 100-5058-H08 0.310”
0.092 – Low Friction 100-5058-L92 0.330
0.092 – High Pressure 100-5058-H92 0.290
Table 12: Spacer Selection
4.4 Support Equipment
The following support equipment is available on order from Phuel Oil Tools
Part No Qty Description
900-2042-STL 1 Test Blank
Table 13: Support Equipment
EXAMPLE