Step 6:
Settings
On the touch panel, click TOOLS, then click Z CALIB on your touch panel to begin the
calibration process. Click NEXT and wait for 1-2 minutes as the building plate extends to the
LCD screen.
Step 7:
Apply Pressure on the Building Plate
Once the plate has touched down, press down tightly on the sides of the building plate and
adjust it to make sure it is lying tight against the sheet of paper.
Step 8:
Tighten all 4 screws on the sides of the building plate, with the other hand still
pressing the building plate down.
Step 9:
Click DONE on the touch screen and wait for the building plate to retract.
Step 10:
Once the plate has retracted, remove the A4 paper, and you’re ready to begin your
3D printing journey!