P5H-154 User Manual > How to Use > Reset
2021-12-10
Sollae Systems
page 11 of 15
Reset
Settings Reset
Settings Reset makes all settings of your PHPoC products to factory default.
Settings Reset Procedure
Step
Action
Product State
RJ45_Y LED
1
Press function button shortly (less than 1
second)
Button setup mode
On
2
Keep pressing the function button over 5
seconds
Preparing initialization
Blink very
rapidly
3
Check if the RJ45_Y LED is turned OFF
Initialization ready
Off
4
Release the function button right after the
RJ45_Y is OFF.(※ If you don't release the
button within 2 seconds, the state go back
to the step 3)
Progressing
initialization
On
5
Rebooting automatically
Initial state
Off
Factory Reset
Factory Reset makes all settings of your PHPoC products to factory default including a password.
Futhermore, all files stored in flash memory are deleted as well as certificate. Because of this, you
have to backup your files before doing Factory Reset. To progresss the Factory Reset, the PHPoC
Debugger is required.
