Photron FASTCAM Mini AX Series, Руководство по оборудованию

Страница: 29 / 74

15
1.3
Input
/O
ut
put Si
gnal
Typ
es
FASTCAM Mini AX
15
FASTCA
M Mini
OUTPUT (1, 2) Connector
These are also BNC connectors. The signals below can be changed and output from PFV.
The output voltage is 0V to +5V, positive or negative polarity, pulse width can be changed.
Default settings are OUTPUT1 connector is”SYNC POS”, OUTPUT2 is ”TRIG POS”.
(POS: positive polarity, NEG: negative)
Menu Display Contents Signal Type
SYNC POS
Outputs a positive polarity vertical
synchronization signal. +5V CMOS output,
Positive Polarity
SYNC NEG
Outputs a negative polarity vertical
synchronization signal. +5V CMOS output,
Negative Polarity
EXPOSE POS Outputs the sensor's exposure interval at H level.
+5V CMOS output,
Positive Polarity
EXPOSE NEG Outputs the sensor's exposure interval at L level.
+5V CMOS output,
Negative Polarity
REC POS
Outputs an interval signal during recording at H
level. +5V CMOS output,
Positive Polarity
REC NEG
Outputs an interval signal during recording at L
level. +5V CMOS output
Negative Polarity
TRIG POS
Outputs the trigger signal received by the camera
at H level.
+5V CMOS output,Positive Polarity
For TRIG SW IN,approx 20 sec.
For INPUT,approx 110n sec.
TRIG NEG
Outputs the trigger signal received by the camera
at L level.
+5V CMOS output,Negative Polarity
For TRIG SW IN,approx 20 sec.
For INPUT,approx 110n sec.
READY POS
Outputs a signal at H level during the trigger wait
state.
(READY in START mode.) Only valid during
START, CENTER, END, and MANUAL modes.
+5V CMOS output,
Positive Polarity
READY NEG
Outputs a signal at L level during the trigger wait
state.
(ENDLESS recording state in CENTER, END,
MANUAL)
Only valid during START, CENTER, END, and
MANUAL modes.
+5V CMOS output,
Negative Polarity