Photron FASTCAM MH6, Руководство по оборудованию

Страница: 8 / 52

Us
in
g
th
e
S
ys
te
m
S
a
fe
ly
a
n
d
Corre
ctl
y
■Always unplug the system when cleaning it or when it is unused for a long period
of time. Leaving or storing the system connected to the power source might cause
fire from insulation deterioration or electrical discharge.
■Please consult us in advance when you perform an event by which laser light or
direct rays fall on the image sensor surface.
■Do not set the system in a location where the temperature gets unusually hot.
The trunk and inside of a car can get especially hot in summer.
Doing so can cause the outer case and internal components to deteriorate or cause a
fire.
■Do not place the system in a location prone to oily smoke or steam, or in a location
with a lot of humidity or dust.
Oil, moisture, and dust conduct electricity, which can cause a fire or electric shock.
■Ambient temperature 0-45°C, humidity 80% RH or lower, maximum altitude
2,000m or lower. In addition, if exceeding these limits, use in a condensation-free
environment.
Use in a condition out of the above limits can cause malfunction.
■Do not store the equipment in a location where the temperature goes below -20°C
or higher than 60°C. Also, prevent condensation from forming during shipment.
■When shipping, remove the connecting cable and use the original packaging or a
dedicated carrying case.
Do not ship the equipment in an environment where the temperature goes below -
20°C or higher than 60°C. Also, prevent condensation from forming during
shipment.
Caution