SPYRON Instruction Manual 2021
10
Perform the following procedure to install the sacrificial window onto the objective lens
assembly.
CAUTION
If adverse operating conditions (blowing dust or sand) are expected to exist,
attach the sacrificial window to protect the objective lens from scratches or
other damage.
1.
If the objective lens cap is in place, remove it.
2.
Carefully push the sacrificial window onto the objective lens until it stops. Turn the
sacrificial window clockwise until it snaps into place.
2.6
J-Arm Mount Installation
Install the head/helmet mount adapter into the monocular by following the procedure.
1.
Align the thumbscrew with the threaded hole and tighten.
2.
Locate the connector on the J-Arm mount adapter that fits into a groove on the
monocular.
3.
Make sure the connector on the adapter fits the monocular.
4.
Loosen the clamp knob and pivot the arm to the other side for SPYRON use with the
right eye.
Figure 2-2 J-Arm Mount Adapter Installation
2.7
Installation of weapon mount (optional)