Photon Systems Instruments SpectraPen SP 110, Инструкция по эксплуатации

Страница: 11 / 32

Page | 11
Options
Settings – this function is used to set various variable for the light measurements and for the device operation
•
Graph (Fig. 7) – displays options for setting the wavelength range and graph
features
o
Zoom enable – enables the zoom feature. With the stylus select an area
(in the right-down direction) of the displayed graph which you want to
zoom in. Reverse these steps if you want to return to the original
display.
o
Marker enable – enables display of the numeric coordinates of the
point touched on the graphical display (in the right hand corner).
o
Autoscale - enables the auto scale of the y-axis. The Y axis is
automatically adjusted according to measured values.
o
Smoothing – enables noise reduction of the graphical display by
Smoothing the noise in the spectrum at the expense of spectral
resolution.
o
Wavelength range – defines the range of wavelengths. Desired
wavelength range can be adjusted by selecting the wavelength and by
using the arrows up and down.
Fig. 6 Memory info.
Fig. 7 Settings - graph.