Page | 11
Step 5: Switch on the device.
[1]
Switch on the power switch of the Power
Supply control unit) (Fig. 13).
[2]
When using your LED Light Source with the
Light Controller, first switch on the Power
Supply. Then, switch on the Light Controller
LC 100 (Fig. 14).
5
D
EVICE
O
PERATION
The device can be controlled either in the manual mode or in the external mode:
•
The manual control mode allows permanent lighting that can be controlled in the intensity.
•
The external control mode provides the possibility of creating sophisticated protocols for precise control of the light mode, intensity
and timing. Light can be dynamically modulated with periods ranging from microseconds to hours. The external control mode requires
either the Light Controller LC 100 or the Light Studio software in a PC.
Fig. 14 Switch on the Light Controller LC 100
Fig. 13 Switch on the power switch of the Power Supply
Содержание SL 3500
Страница 1: ......
