Photon Systems Instruments AquaPen-C AP 110-C, Инструкция по эксплуатации

Страница: 10 / 52

Page | 10
3.1 L
IST OF EQUIPMENT AND CUSTOMER INFORMATION
Standard version of the AquaPen device package consists:
•
AquaPen-C AP 110-C or AquaPen-P AP 110-P
•
Carrying Case
•
pieces of 4 ml volume plastic cuvette with stopper (AquaPen-C only)
•
FluorPen software and driver (on a USB flash disc)
•
Operation Manual (PDF on a USB flash disc)
•
USB Cable
•
Other Accessories or Optional Features (according to your specific order)
For data download via USB connection, the USB driver needs to be installed on the PC. It can be found on the
installation disk (USB driver folder).
If any item is missing, please, contact the manufacturer. Also check the carton for any visible external damage. If
any damage is found, notify the carrier and the manufacturer immediately. The carton and all packing materials
should be retained for inspection by the carrier or insurer.
For customer support, please write to: support@psi.cz
3.2 C
ARE AND MAINTENANCE
AquaPen-P AP 110-P
•
Never submerge the whole device in the liquid!
•
Only the optical tip can be submerged!
•
Rinse the optical tip of the AquaPen-P in freshwater after each use.
•
Inspect visually the optical window after each use. If cleaning is needed, use soapy water and soft, non-abrasive tissue for cleaning
the optical part.
•
The device should not come in contact with any organic solvents, strong acids or bases.
AquaPen-C AP 110-C
•
Never submerge the device in water!
•
Keep the optical part clean and dry. If cleaning is needed, use soft, non-abrasive tissue.
•
The device should not come in contact with any organic solvents, strong acids or bases.
•
To measure samples, use a standard 4 ml volume cuvette (plastic cuvettes with 4 clear faces for visible range from Kartell are
recommended). Fill the cuvette with 3 ml of the sample. Minimal volume for accurate measurements is 2 ml.
•
Clean the cuvettes with distilled water, avoid contact with alcohol and solvents.
Li-ion battery
•
Avoid fully discharging of the battery.
•
Do not keep the battery at full charge for all the time.
•
Keeping at high temperatures shortens battery life.