Photon Focus DR1-D3360-192-G2-8 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 119

Photon Focus DR1-D3360-192-G2-8 Скачать руководство пользователя страница 107

7.12

Decoding of images in DR1 cameras

The images arrive in a encoded (compressed) format in the DR1 cameras if

EnDoubleRate

=

True

.

There are functions in the pfDoubleRate package to decode the images. The package
documentation is located in the

SDK\doc

sub-directory of PFRemote installation directory.

Examples are located in the

SDK\Example\pfDoubleRate

sub-directory. The package is installed

with the PFInstaller that can be downloaded from the Photonfocus web page. During the
installation process, the option

DR1 support

must be checked.

There are separate decoding functions for monochrome and for color DR1 cam-
eras.

7.12.1

Status line in DR1 cameras

The newer revisions of the DR1 camera series contain the status line feature (see Section 5.10).
The status line is supported in the pfDoubleRate.dll from the PFInstaller Rev. 2.38 and later.
The whole image, including the status line, can be applied to the demodulation functions. The
status line is copied unmodiﬁed to the demodulated image, which is the correct behaviour as
the status line is never sent in modulated format.

7.13

DR1Evaluator

The DR1Evaluator is a tool to evaluate the effect of the encoding algorithm that is
implemented in the DR1 cameras. It is included in the PFInstaller that can be downloaded from
the Photonfocus website.

The main window of the tool is shown in Fig. 7.6.

Figure 7.6: DR1Evaluator

An input ﬁle can be selected by clicking on the button

Select Input File

.

Suitable images for evaluation of the monochrome encoding algorithm can be
downloaded from the website http://www.imagecompression.info/test_images.
Download the Gray 8 bit images. The best images for evaluation are the images
that were taken by a camera. The artiﬁcial images don’t reﬂect a "real-world"
situation.

7.12 Decoding of images in DR1 cameras

107

«
...
105
106
107
108
109
...
»

Содержание DR1-D3360-192-G2-8
























































































































Отзывы:

Нет отзывов