For detailed specifications,
product tutorial videos
and more, please visit
www.photoflex.com
Rev 09/2016
Figure 12
Figure 16
Figure 13
Figure 17
Figure 14
Figure 18
Figure 15
Figure 11
11. Here is the umbrella with half the black cover removed.
12. When all eight caps are removed, unscrew the cap at the top of
the umbrella.
13. With the cap loose, remove the black cover and replace the cap on
the umbrella.
14. You’re now ready to use the umbrella as a shoot-through.
Folding the Umbrella
Figures 8 – 14
Put the black cover on the umbrella, if removed.
15. Remove the umbrella from the MultiClamp or light. Hold the lower
end of the post with one hand.
16. With the other hand, push the metal locking tab into the post until
the metal slider is free.
17. Pull the metal slider down the post until the umbrella is closed.
18. Wrap the Velcro strap around the material and secure it.
Customer Support (831) 786-1370
E-mail: [email protected]
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. Photoflex
®
and the Photoflex logo are trademarks or
registered trademarks of Photoflex and/or its affiliates in the U.S. and other countries.
PHOTOFLEX
®
WARRANTY
• Warranties only cover manufacturer’s defects and workmanship.
• We reserve the right to inspect all merchandise returned (end
users and dealers) for warranty fulfillment.
• All returns must be pre-approved with Return Manufacturers
Authorization obtained from Photoflex/PromarkBRANDS.
• A receipt showing date of purchase will be required for all returns.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
