For detailed specifications, product tutorials and more, please visit
www.photoflex.com
Figure 17.
Figure 19.
Figure 21.
Figure 18.
Figure 20.
Figure 22.
17.
The inner baffle has elastic bands with metal clips at each of the
four corners. The interior of the LiteDome softbox has four white
nylon loops. Secure one metal clip to each of these loops.
18.
Inner baffle correctly installed in place.
19.
The face diffuser is rimmed with Velcro that attaches to its
counterpart lining the front of the LiteDome. Find the long edge of
the diffuser and line up with the long edge of the LiteDome front.
Starting at one corner, press the face diffuser on place. Work your
way around the rim of the softbox until the diffuser is in place.
20.
Your softbox is now fully constructed.
Circle Face Mask
21.
The MultiDome comes with a circle mask which can be placed in
front of the diffusion face for a circular output. The mask attaches in
the same fashion as the diffusion face.
22.
The installed face mask should look like this.
Rev 09/2016
Customer Support (831) 786-1370
E-mail: [email protected]
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. MultiDome
®
, OctoDome
®
, QRC
®
, Photoflex
®
and the
Photoflex logo are trademarks or registered trademarks of Photoflex and/or its affiliates
in the U.S. and other countries.
PHOTOFLEX
®
WARRANTY
• Warranties only cover manufacturer’s defects and workmanship.
• We reserve the right to inspect all merchandise returned (end
users and dealers) for warranty fulfillment.
• All returns must be pre-approved with Return Manufacturers
Authorization obtained from Photoflex/PromarkBRANDS.
• A receipt showing date of purchase will be required for all returns.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
