D
1.
Insert a Support Frame Tube (E) to each
end of the Middle Support Frame Tubes
(D). Be sure to note that they are locked
into position.
2.
Slide each assembled Support Frame Tube
through each of the long pockets of the
fabric of choice.
3.
Slide one of the Tension Rod (C) through
one of the end pockets of the fabric. One
at a time, insert each end of the threaded
ends through the holes located at each
end of the Frame Tubes. Then affix and
tighten each of the two nuts to the threads
on each end of the rod.
4.
Repeat the step above for the opposite
end of the Support Frame Tubes.
5.
Next, Slide the Support Frame Tubes onto
the Support Assembly’s (B) Bolts; affix and
tighten the nuts.
6.
B
A
C
E
F
A.
Durable Carry Case
B.
(1) Support Assembly with Spring Loaded Tilt-
Adapter with locking nuts
C.
(2) Tension Rods with locking knobs
D.
(2) Support Frame Tubes (middle segments)
E.
(4) Support Frame Tubes (end segments)
F.
Silver, White and Gold Reflector Fabrics
How to assemble:
What’s in the Box:
Simply mount the assembled reflector
onto any light stand with a 5/8” spigot
and adjust for the desired effect.
