CURE M
Warning:
This oven uses UV LED light sources of
high energy UV rays can cause serious harm to
health, especially for eye and skin; so avoid direct or
indirect exposure to such emissions even for short
periods of time.
Warning:
Even though the Cure M oven is equipped
with an automatic switch off system on the UV
LEDs we do advise caution and to not accidentally
or intentionally open the door during use. If during
the process you need to open the door, pause the
programme using the interface before opening the
device.
Warning:
The safety systems on the CURE M are
intended as emergency aids: do not try tamper in
any way with the integrity of the UV oven or any
part thereof. Please do not tamper with the closed-
lid control system. In case of a malfunction of the
system or in case of incorrect lighting of the LEDs
with the door open, immediately remove the power
plug from the outlet and contact technical support.
Warning:
The CURE M is powered by a 220V
mains voltage, avoid tampering with the parts of
the equipment to avoid the risk of electrocution. In
case of malfunction of the device contact technical
support.
Warning:
The CURE M has a touchscreen interface
and does not use commands or mechanical buttons.
For this reason, even when the oven is not in use
please turn off to prevent damage. Disconnect
power to the CURE M each time it is not used for
long periods, especially if left unattended.
Warning:
CURE M utilizes the heat generated by the
LEDs to accelerate the drying process of the resins, The
treated objects and the oven itself may be very hot.
Warning:
CURE M uses the heat generated by the
LEDs for accelerate the drying process of the resin, do
not leave the CURE M unattended to avoid risk of fire.
Warning:
The resins during polymerization can
generate a lot of heat, especially if collected in large
quantities. Never leave the CURE M unattended to
avoid the risk of fire.
Warning:
The printed parts that are placed to dry
within the CURE M can generate fumes that are
harmful volatile substances to your health. Position
and use the CURE M in a well-ventilated place.
Warning:
The fan located on the CURE M has the
task of controlling the temperature of the device
through numerous air vents placed at different points
of the CURE M. Do not obstruct these air vents or
the opening to the fan itself, if these are obstructed,
they can cause damage to the CURE M itself.
Warning:
The CURE M is a device for professional
use. Keep in a safe place, accessible only
to qualified
technicians who follow these instructions. Do not
allow children to use this device.
SAFETY RULES
Warning:
Place CURE M away from heat sources,
away from flammable materials and liquids that may
cause risk to the safety of the device. Do not wet,
wipe with a dry cloth.
Photocentric declines all responsibility for
incorrect use or improper use of its products.
1
Drying compartment lid
5
Support Plate (with 4 rubber supports)
2
Display Touch screen
6
Curing
3
Fan air output connection
7
Mains
4
Power supply 3A Fuse
UK, EU + US plug included
let’s get to
know it...
1
2
3
4
5
6
7
CURE M
Warning:
Keep hands and fingers clear when
closing the lid of the CURE M unit.
