Phonocar VM 040, Руководство пользователя

Страница: 47 / 116

GB
47
Setup
6.
R:A movie rating that allows admission only to persons of a certain age, usually 17, unless accompanied
by a parent or guardian.
7. NC-17: A movie rating that allows admission to no one under the age of 17.
8. Adult: A movie rating that is condign to the adult only.
Procedures of changing the rating:
1. Enter password to unlock the parental lock Locate the cursor on the ‘password’ option,press the nume
rickeys on the remote control or touch the ‘Password’ option directly to open the onscreenkeypad,touch
thenumeric buttons to enter your password and then confirm.
2. Change the rating
Select an appropriate rating from the ‘rating’ list.
3. Close the parental lock.
Repeat the operation of the first step to enter a 6-digit password (old or new) and then confirm. The
parental lock is closed.
• Load Factory
To restore the default settings relating with DVD playback (e.g.: DVD Audio, DVD Subtitle), press the
[RESET] option only.
Hardware
• Camera In
Normal: Actual scenes shot by the camera display on the TFT monitor while reverse driving (just like
what you are looking). Mirror: The mirror images of actual scenes display on the TFT monitor while
reverse driving (just like looking from the rearview mirror).
• TFT Auto Open Auto:
The TFT panel automatically opens when the unit is turned on. Manual: When the ignition is turned off,
the TFT panel remains open if it was opened previously. Off: The TFT panel opens only by pressing
OPEN button when the unit is turned on.
• Video input NTSC:
Set the color system of the TFT screen to NTSC. PAL: Set the color system of the TFT screen to PAL.
AUTO: Set the color system of the TFT screen automatically by the unit according to the input
video formats.
• Parking
On: Image displays only after your car has been parked.
Off: Image displays at all times.
P.VOL
P.VOL means Programmable Volume.
You can balance the volume among different audio sources using this function.
• Source
Select one playing source that you want to set relative volume.
• Level
You can set relative volume level from -6 to 6.
TS CAL
When the touch function is not sensitive or valid, you should calibrate the touch screen by this function.
Calibrate the touch screen just following the screen introductions after entering the TS CAL mode.