Phonic Sound Ambassador 120 Deluxe, Руководство пользователя

Страница: 7 / 32

7 Sound Ambassador 75 Deluxe / Sound Ambassador 120 Deluxe
CD PLAYER
1. Program
– Push this button to enter a track into your
program memory, to play the CD in the track order of
your choosing.
2. CD Slot – Insert your CD here. Ensure the CD’s label
is facing upwards.
3. Eject – When a CD is loaded, push this button to
remove.
4. Power – Pushing this button turns the power of the
CD player on and off.
5. Digital Display – View the track number and elapsed
time here.
6. Shuffle – Pushing this button allows the CD player to
play tracks in a random order.
7. Repeat / Enter – Push this button to set the repeat
mode.
8. Stop – When a CD is playing, push this button to
stop it.
9. Pause/Play – Pushing this button plays or pauses
the selected track.
10. Reverse – Push this button to go back through the
tracks. Hold it down to rewind an individual track.
11. Forwards – Pushing this button skips forward
through the tracks. Holding it down will allow you to
skip forward through an individual track.
12. Level Control – adjust the level of the CD player’s
audio using this knob.
TAPE PLAYER
1. Tape Deck – when the tape deck has been opened,
insert a cassette (magnetic tape down) here.
2. Eject – Push this button to open the tape deck.
3. Counter – Gives a visual indication of time elapsed
on the tape. Press the restart button to set to 000.
4. Speed Adjust – Slow down or speed up the tape
using this.
5. Repeat Display
– Users can see how their tape
will react when it gets to the end of the current side.
Select the repeat type by pushing the Mode button.
6. Record – Push this button and either the reverse
play or forward play buttons to record any signal sent
to the tape player.
7. Rewind – Rewind the tape using this button.
8. Reverse Play – Play the “other side” of your tape,
using this button.
9. Forward Play – Play your cassette on the side that
you inserted it.
10. Fast Forward – Quickly skip through the tape using
this.
11. Stop – Stop playing your tape by pushing this
button.
12. Mode – This allows you to adjust the tape player so
it plays a single side then stops, plays both sides and
stops, or continuously plays both sides until you stop
it manually. Your option will be shown on the repeat
display (5).
Information contained within this page may be outdated
by time of printing.
When the Sound Ambassador is used as a floor monitor, do
not attempt to use the built-in CD player.