Phonic SAFARI 3000, Руководство пользователя

Страница: 9 / 40

English
Deutsch
Español
Français Português
日本語
简体中文
5 Safari 3000
Transmitter Components
Beltpack Handheld Microphone
lavalier
WB-1
UHF
Headset
WB-1
UHF
Manual Scan
1. Power-on the Safari One-touch Autoscan wireless receiver
(WR-1) and the microphone transmitter (WM-1 or WB-1).
2. Push the Scan button on the WR-1 for 2 seconds. The numeric
LEDs on the WR-1 will begin to blink. To manually select fre-
quency, continue to click the Scan button until you reach the
desired channel.
3. Hold the WM-1 / WB-1 close against the receiver and push
the Lock button to confirm the channel and establish the link
between the microphone transmitter and receiver. At this point,
the RF LEDs will activate and the AF LEDs will respond to the
microphone signal. If the connection is not established, reat-
tempt the manual or autoscan process.
WB-1
UHF
Antenna
Power Switch
Headset / lavalier mic jack
Power Status
Infrared
Power Switch
Battery Compartment