Phonic POWERPOD 750RW, Руководство пользователя

Страница: 10 / 20

6
POWERPOD 750RW
English
33. Monitor Level Control
This rotary control allows the user to adjust the final signal level
sent to all Monitor outputs.
34. Main Level Control
This rotary control allows the user to adjust the final signal level
sent to the Main and Speaker outputs.
35. Level Meter
These level meters give accurate indications of when audio levels
of the Main 1/2 and Monitor outputs reach certain levels. The 0
dB indicator illuminates is approximately equal to an output level
of +4 dBu. It is suggested for the maximum use of audio to set
the various levels controls so that it sits steadily between 0 and
the second highest level indicated on the Level Meter to make full
use of audio, while still maintaining fantastic clarity. The Powerpod
750RW features two single 5-segment LED displays.
36. Limiters
These LED indicators illuminate when the power amplifier’s built-in
limiters are activated, which effectively reduce signal levels when
they reach high levels that could prove to damage sound quality.
37. Power Indicator
This LED indicator illuminates when power of your Powerpod
mixer is activated.
38. Bluetooth On Button and Indicators
This button turns the Bluetooth function of the Powerpod 750RW
on and off. The LEDs that accompany it indicate the status of the
feature. The LED immediately above the button shows the feature
is turned on while the "WIRELESS READY" LED will light up
when a connection is established between a SmartDevice and the
Powerpod.
39. Bluetooth Level Control
This rotary control will adjust the level of the incoming Bluetooth
signal that will be sent to the main mix.
31. Phantom Power Switch and Indicator
When this switch is in the on position it act48V of phantom
power for the XLR inputs on channels 1 to 4, allowing condenser
microphones to be used on these channels. The corresponding
LED will illuminate when the Master Phantom Power is activated.
32. Amp Select Switches
This switches control the activity of the built-in power amp,
enabling the user to alternate between the different signals which
can be processed by the built-in power amp and routed to the
speaker outputs on the rear of the device. This switch allows you
to select from: Main/Monitor – taking the monitor and main signals
and directing them to the appropriate speaker outputs – Main 1 /
Main 2 – using the Main 1/2 signal to feed the speaker outputs –
and Main Bridge – which combines the Main Left and Right signal
and feeds them through the Bridge output.
NB. When using a mono bridge connection, do not connect a speaker to any
of the Main/Monitor A or B jacks, located on the rear of the mixer. Use the
"Bridge" speaker jack only.
31
36
37
35
33
35
36
34
32
39
38