Phonic Powerpod 415RW, Руководство пользователя

Страница: 7 / 16

3 POWERPOD 415RW
English
20. SPEAKER OUTPUT JACKS
Speakers can be connected to these sockets, two speakers can
be connected to the powered mixer. When using 2 speakers at the
same time, use 8~16 ohms speakers. When using one speaker
only, use a 4~8 ohms speaker. The total minimum required load
is 4 ohms. If the total load is less than 4 ohms, it may damage
this powered mixer.
21. MAIN OUT / AMP IN
This unbalanced insert point is a break between the main out and
built-in amplifier to allow the main output to be sent to an external
signal processor or power amplifier. The insert is a 1/4
’ phone
jack socket which is normally bypassed. When a jack is inserted,
the signal path is broken.
The main output signal appears on the TIP of the plug and the
external signal is returned on the RING. A
“ Y ” cable may be
required to connect to equipment with separate send and return
jacks as shown below:
MIN. REQUIRED LOAD
4 Ohms=SPEAKER A+B
MAX OUTPUT=100W/4 Ohms
19 20 21
17 18