Phonic POWERPOD 2000R, Руководство пользователя

Страница: 11 / 28

7 POWERPOD 2000R
English
SPECIFICATIONS
Powerpod 2000R
POWER AMP, output power in watts @THD<0.5%, 1KHz
Number of Power channels 2
Limiter 2
8 ohms per channel 600
4 ohms per channel 1000
2 ohms per channel 1500
Inputs
Hi-Z / Super Hi-Z channels 4, 1 with Super Hi-Z (470k ohms)
Balanced Mic/ Line-Level channels 8 XLR, 4 x TS Unbal.
2T input 2 x 1/4" TS Unbal.
Outputs
Main out 2 x 1/4" TS, Unbal. (Stereo)
Monitor out 1 x 1/4" TS, Unbal.
REC out 2 x RCA
Speaker outputs 2 x SPEAKON & 1/4" TS
Channel Strips 8
Monitor / Effect send controls 2
Pan/Balance control Yes
Volume Controls Rotary
Pad in/out CH 1-5
Master Section
Effects Return to Monitor Yes
Faders Monitor, Main L/R (Rotary)
Standby Mute CH 1-7
Metering
Number of channels 2
Segments 6
Phantom Power Supply +48V DC Global
Digital Effect Processor
40-bit, 16 effects with one main parameter control,
tap delay control, foot switch (effect on/off, tap)
Noise: 20Hz to 20KHz bandwidth, IHF-A weighted, line inputs to main L/R outputs, all channels assigned, panned L/R
Master output, all fader down <-78 dBu
Power amp output, all fader down <-63 dBu
THD
Power output, 1KHz, 20Hz to 20KHz.
Any output, 1KHz @ +14dBu, 20Hz to 20KHz, channel inputs
<0.5%
CMRR (1 KHz @ -60dBu, Gain at maximum) 80 dB
Crosstalk (1KHz @ 0dBu, 20Hz to 20KHz bandwidth, channel in to main L/R outputs)
Channel fader down, other channels at unity <-63 dB
Channel muted, other channels at unity <-64 dB
Frequency Response (Mic input to output)
20Hz ~ 20KHz, line level o/p @ +4dBu into 600 ohms
20Hz ~ 20KHz, power amp o/p 1 watt into 8 ohms
+0/-2 dB
Maximum Level
Mic preamp input +10 dBu
All other inputs +22 dBu
Unbalanced output +22 dBu
Impedance
Lo-Z input (Mic in) 2.2k ohms
Hi-Z input (Line in) 5k ohms
Super Hi-Z (Line in) 470k ohms
All other input (except insert) >10k ohms
RCA 2T output 1.2k ohms
All other outputs 560 ohms
Equalization
Low EQ 80 Hz
Mid EQ 2.5 kHz
Hi EQ 12 kHz
Vocal Enhance CH 1-5
Foot Switch Digital effect mute: ON/OFF
Microphone Preamp E.I.N. 150 ohms terminated, max gain <-122 dBm
Power Requirement Switchable between 115/230 VAC, 50/60 Hz