5
NEXUS 915SB / 935SB
SUBWOOFER
1. Subwoofer Gain Control
This control allows users to adjust the level of the
subwoofer.
2. Left / Mono Mic Input
Connect the left channel from your signal source
to this female XLR input. If you wish to use a mono
source with the Nexus Subwoofer, this connection
can be used.
3. Right Input
Connect the left channel from your signal source to
this female XLR input.
4. Ground / Lift Switch
This switch removes the earth ground from circuit to
eliminate excessive hum caused by ground loops.
5. Left Speaker Outputs
These male-XLR output connectors are for sending
the left speaker signal to external active speakers.
The uppermost jack will output a full-range signal,
whereas the lower jack will output a signal affected
by a high-pass filter, suitable for tweeters.
6. Right Speaker Outputs
These male-XLR output connectors are for sending
the right speaker signal to external active speakers.
The uppermost jack will output a full-range signal,
whereas the lower jack will output a signal affected
by a high-pass filter, suitable for tweeters.
7. Power Connector
This input is for the connection of an AC power cord,
allowing power to be supplied to the device. For
safety reasons, it’s suggested that you use the power
cord provided with this unit only.
8. Power Switch
This switch turns the Nexus Subwoofer on and off.
Activation of this unit will be accompanied by an
illuminated LED.
1
2
3
4
6
5
7
8
