![Phonic MU 1002 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/phonic/mu-1002/mu-1002_user-manual_1552806007.webp)
PHONIC CORPORATION
MU 502/802/1002 USER
’
S MANUAL
Page 6
MU 502/802/1002 USER
’
S MANUAL
PHONIC CORPORATION
Page 7
7. EFX Send (MU 802 and 1002)
These 1/4” TS outputs may be used to connect to an
external digital effect processor, or even to an amplifier
and speakers (depending on your desired settings), to
the mixer. This output, however, is only featured on the
MU 802 and MU 1002 mixers; therefore you shouldn’t
go looking for it on the MU 502.
8. Phones
This stereo output port is suited for use with headphones,
allowing monitoring of the mix. The audio level of this
output is controlled using the Phones/Control Room
control.
9. 2T Record / Record Out
These outputs will accommodate RCA cables, able to be
fed to a variety of recording devices. Also included is a
mini stereo jack for the addition of recording devices such
as MD players, and even laptop computers.
10. 2T Return
These RCA and mini
stereo inputs are used
to connect the mixer with
external devices, such as
tape and CD players, or
even Laptop computers,
receiving a signal from
another source and feeding it to either the Main L and R
or the Phones mixing bus. The 2 trim controls, featured
on the MU 502 model only, control the input sensitivity
of the RCA and mini stereo jacks, ensuring total control
over audio levels and quality.
11. Control Room Outputs (MU 802 and 1002)
These two 1/4” Phone Jack outputs feed the signal
altered by the Control Room/Phones level control on
the face of the mixer. This output has extensive use,
as it can be used to feed the signal from the mixer to
an active monitor, for the monitoring of the audio signal
from within a booth, among other possible uses. This
output, however, is featured on the MU 802 and 1002
mixers only.
Rear Panel
12. Power Switch
This switch is, of course, used to turn
the mixer on and off.
13. Power Connector
This port is for the addition of the ex-
ternal power supply, allowing power to
be supplied (hence the name) to the
mixer. Please use the power supply
that is included with the mixer only.
Содержание MU 1002
