Phonic ICON300, Руководство пользователя, Страница: 8 / 24

8 ICON 300/700
Specifications
ICON 300 ICON 700
Direct Power Out
Max.average power at 45Hz-20kHz
With 0.1% THD
8 ohm 120W×2 240W×2
4 ohm 200W×2 400W×2
2 ohm,1kHz,1%THD 300W×2 550W×2
Bridged mono 8 ohm,1kHz,1%THD 420W 850W
Bridged mono 4 ohm,1kHz,1%THD 540W 1100W
Isolated Constant Voltage Out
200V or 140V Bridege 300W 700W
100V or 70V 150W×2 350W×2
25V 120W 280W×2
frequency response
Direct Outputs (+0/-2dB) 50Hz-50kHz
Isolated Outputs (+0/-2dB) 50Hz-16kHz
Total harmonic Distortion <0.05 <0.05
Sensitivity (fro full output) 1.02V 1.02V
Voltage Gain 28dB 32dB
Input Impedance
Balanced/Unbalanced 20k/10k ohm
Damping factor >200(direct output)
S/N ratio Less than 100dB below rated output (20Hz-20kHz)
Protection Circuits
Output offset voitage protection
Heat sink overheat protection
Transformer overheat protection
Load shorting protection
Power on/off protection
Controls
Front Panel Power Switch
Rear Panel Ch1 & Ch2 gain controls (41 click); Parallel/Stereo/Bridge switch
Connectors
Input XLR jack ×2,Barrier strip ×1
Output Covered Barrier strip ×2;heavy-duty binding post
Cooling One dual speed fan
Indicators
Clip:Red Signal:Green Pro-
tect:Yellow Power:Red
Limit:Red Signal:Green Pro-
tect:Yellow Power:Red
Dimensions(h×W×D) 132×480×428mm 132×480×428mm
Net Weight 24.3KG 24.3KG
Shipping Weight 26.0KG 26.KG