Phonic i7300 ReverbMaster, Руководство пользователя

Страница: 14 / 37

10 i700
English
Chorus
Editable Property Range Description
lFo 0.1 to 10 low Frequency oscillator (ie. oscillates low frequencies)
Pre Delay 1 to 200 ms enalbes a delay before the chorus effect is activated
Depth 0 to 100 allows users to adjust the depth of modulation
Phase 0 to 180° used to adjust the phasing of left and right channels
lPF hz to 10 khz
Determaines the frequency at which a low pass filter will activate
balance 0 to 100 50 being the center, this allows users to adjust the balance of the chorus reverb
Mode typ sine, trg or saw Determaines the type of curve used to modulate the chorus reverb
Phaser
Editable Property Range Description
lFo 0.1 to 10 low Frequency oscillator (ie, it oscillates low frequencies)
Depth 0 to 100 allows users to adjust the depth of modulation
Delay 0.0 to 5.0 enables a delay before the Phaser effect is activated
Phase 0 to 180° used to adjust the phasing of left and right channels
Fb -100 to 100 creates feedback with positive or negative phasing
Mod typ sine, trg or saw allows users to select waveform used for low frequency oscillation
balance 0 to 100 50 being the center, this allows users to adjust the balance of the Phaser reverb
Pan
Editable Property Range Description
speed 0.1 to 10 hz allows you to select the pan speed between 0.1 and 10 hz
Profundidad 0 a 100 Determines the depth of the pan modulation
type i <--> D, D-->i, i-->D allows you to selecty from the types of panning
Mod typ sine, trg or saw allows users to select waveform used for low frequency oscillation
Delay
Editable Property Range Description
l Dly 0.00 to 2.55 allows you to choose the delay time of the left channel
R Dly 0.00 to 2.55 allows you to choose the delay time of the right channel
c Dly 0.00 to 2.55 allows you to choose the delay time of a center channel
Fb Dly 0.00 to 2.55 allows you to choose a feedback delay time
l lvl 0 to 100 allows you to choose the delay level of the left channel
R lvl 0 to 100 allows you to choose the delay level of the right channel
c lvl 0 to 100 allows you to choose the delay level of a center channel
Fb 0 to 100 allows you to create feedback at a percentage between 0 and 100