24
Settings and additional ports
Setting the Auto On Hook
1. Press
. “Set Display” will be shown in the display.
2. Use or
to page to “Set Phone”.
3. Press to enter the phone setting menu. “Set Ring” will be shown.
4. Use or
to page to “AUTO ON HOOK”.
5. Press to enter the auto on hook setting menu.
6. Use or
to page between “ON” and “OFF”.
7. Press after you have chosen the desired setting.
Setting the Auto AMP function
1. Press
. “Set Display” will be shown in the display.
2. Use or
to page to “Auto AMP”.
3. Press to enter the automatic amplification menu.
“OFF” will be shown in the display.
4. Use or
to page between “ON” and “OFF”.
5. Press after you have chosen the desired setting.
Setting the Mic AMP function
1. Press
. “Set Display” will be shown in the display.
2. Use or
to page to “Mic AMP”.
3. Press to enter the microphone amplification menu.
“0dB” will be shown in the display.
4. Use or
to page between “+4dB”, “0dB” and “-4dB”.
5. Press after you have chosen the desired setting.
Connection jack for vibrating pillow and/or modules
Your telephone is equipped with a connection jack for a vibrating pillow or
other additional signaling modules from Phonic Ear. You can take advantage
of this option to signal an incoming call not only with a very loud ring and the
very bright flashing light, but also with an optionally available vibrating pillow
and/or other assistive listening devices from Phonic Ear.
Headset port
Standard headset port with a 2.5 mm jack.
Headphone port
Output for connecting headphones, an induction loop or such like.